The Shrimp Circuit Kit with Add-ons (More than 130 Parts!)
The Shrimp Circuit Kit with Add-ons (More than 130 Parts!)
The Shrimp Circuit Kit with Add-ons (More than 130 Parts!)
The Shrimp Circuit Kit with Add-ons (More than 130 Parts!)

The Shrimp Circuit Kit with Add-ons (More than 130 Parts!)

$ 49.95

This is officially six-kits-in-one. But you can also use it to make dozens of basic electronic circuits.

Designed by the Awesome folks at shrimping.it.

Make a DIY Arduino and use that to make your own custom keyboard or a clock.

This is an electronics starter kit that not only allows you to build dozens of simple electronics circuits, but also lets you build your own Arduino!

This set of kits includes the following, along with instructions -

The Shrimp Bundle

  • Arduino-Uno-compatible ATmega328P-PU bootloaded microcontroller
  • 2x 22pF Ceramic Capacitor
  • 4x 100nF Ceramic Capacitor
  • A 10uF Electrolytic Capacitor
  • A 10KΩ Carbon Film Resistor
  • A 100Ω Carbon Film Resistor
  • A 16MHz Quartz Crystal
  • A Two-pin button
  • A Water Clear Ultrabright Red LED
  • 1xRed Stripped solid core 22AWG wire
  • 2xGreen Stripped solid core 22AWG wire
  • A 9-pin header strip
  • 2 400point Breadboards (to build the circuit on)
  • A USB UART module (for uploading programmed behaviours to your Shrimp)

The Persistence of Vision Add-on Kit

  • 8 Red LEDs
  • A 3xAAA battery box with switch

The Conductive Keyboard Add-on Kit

  • A Male A USB adaptor
  • 2x 3.6V Zener Diodes
  • 16x 20 MΩ Resistors
  • 2x 68Ω Resistor
  • 1x 2.2kΩ Resistor
  • 2xRed stripped 22AWG solid core wire
  • 2xGreen stripped 22AWG solid core wire
  • Lengths of 2.54mm male pin header strip
  • Male jumper wires
  • Patches of conductive tape

The Memory Game Add-on Kit

  • 1xAmber Backlit Tactile Switches
  • 1xGreen Backlit Tactile Switches
  • 1xBlue Backlit Tactile Switches
  • 1xRed Backlit Tactile Switches
  • A ~12mm housed Piezoelectric transducer
  • 5x 100Ω resistors
  • 1xOrange stripped 22AWG solid core wire
  • 1xRed stripped 22AWG solid core wire
  • 4xGreen stripped 22AWG solid core wire

The Alarm Clock Add-on Kit

  • A DS1307 Real Time Clock chip
  • A 32.768kHz Crystal
  • A ~12mm housed Piezoelectric transducer
  • 2 Two-pin Tactile Switches
  • A CR2032 Lithium Watch Battery
  • A CR2032-compatible Watch Battery holder
  • A 100Ω resistor
  • 2x 10kΩ Watt resistors
  • 1xBlue stripped 22AWG solid core wire
  • 1xPurple stripped 22AWG solid core wire
  • 2xYellow stripped 22AWG solid core wire
  • 2xYellow stripped 22AWG solid core wire
  • 5xGreen stripped 22AWG solid core wire

The LED CLock Add-on Kit

  • 2x DM134 Constant Current LED Driver chips
  • 2x 680Ω Carbon Film Resistor
  • 25x Water Clear Ultrabright Red LEDs
  • 2xBlue stripped 22AWG solid core wire
  • 2xPurple stripped 22AWG solid core wire
  • 2xYellow stripped 22AWG solid core wire
  • 4xGreen stripped 22AWG solid core wire
  • 4xRed stripped 22AWG solid core wire